Waste Water Protection Systems and Repair

MC-RIM Protect Plus System

Surface protection systems are used in wastewater facilities in order to protect the concrete structures from the penetration of harmful substances, which are dissolved in the water. The highly corrosive stresses exerted by aggressive substances on wastewater treatment structures mean that concrete protection must fulfil the highest demands.

Why MC-RIM Protect Plus?

MC-Bauchemie offer highly effective products as part of a comprehensive and complete system, MC-RIM PROTECT PLUS. This system ensures protection from harmful chemicals which can damage the containing structure. The MC-RIM systems is resistant to hydrostatic pressure and has high abrasion resistance.

Watewater Facility

Product Selection Guide

Product Product Properties Area of Application
MC-RIM PROTECT One-component, fibre-reinforced, suitable for spray or hand application, highly sulphate-resistant.
  • Resistance range from pH 14 to pH 3.35.
  • Permissible layer thickness range: 5 to 15 mm
Surface coating for use in wastewater treatment facilities.
  • Inflow structure/screens
  • Sand and grease trap
  • Primary clarifier
  • Aeration basin
  • Secondary clarification basin
  • Sludge thickener
  • Digestion tower (sludge area)
MC-RIM PROTECT-MR One-component, fibre-reinforced, suitable for spray or hand application, highly sulphate-resistant.
  • Resistance range from pH 14 to pH 3.35.
  • Permissible layer thickness range: 5 to 15 mm.
Surface coating for use on surfaces subject to heavy mechanical stresses in wastewater treatment facilities.
  • Inflow and drainage channel
  • Screw pump
MC-RIM PROTECT-H One-component, suitable for hand or pump application, highly sulphate-resistant.
  • Resistance range from pH 14 to pH 3.5.
  • Permissible layer thickness range: 10 to 60 mm.
Surface coating for use on horizontal surfaces in wastewater treatment facilities.
  • Inflow structure/screens
  • Sand and grease trap
  • Primary clarifier
  • Aeration basin
  • Secondary clarification basin
  • Sludge thickener
MC-RIM PROTECT-BC Mineral bond coat for use in wastewater treatment facilities.
  • One-component, highly sulphate-resistant.
System component for MC-RIM PROTECT-H.
  • Inflow structure/screens
  • Sand and grease trap
  • Primary clarifier
  • Aeration basin
  • Secondary clarification basin
  • Sludge thickener
  • Scum scraper surfaces
MC-PowerPro HCR MC-PowerPro HCR Primer Highly acid-resistant surface protection.
  • Layer thickness: 4 mm.
For applications in wastewater treatment plants in areas with biogenic sulphuric acid corrosion.
  • Digestion tower (gaseous zone)
  • Enclosed plant gaseous zone